Article Index

Timer

About the weekly timer fan speeds time-dependently. There are 3 standard week programs to choose from, in addition to 2 individual week programs are created. It can be 10 times per day defined with appropriate fan speed. Should not be the desire for a time-dependent fan control, this feature can be turned off. The weekly program is only active in 'auto' mode.

 

Standard Profiles

Predefined common time profiles. If these settings are suitable for your application, you can define the quickest road a weekly program.

IMPORTANT: The settings made here override such as sensor values as CO² or humidity.
NOTE: There is no logical examination held at intersections of the times entered. Therefore, make sure the definition that the times are logical.

 

Custom Profiles

You can select up to 10 switching times and the desired speed level at this time of the fan. Entries in which the time fields are From / To not filled in, are not observed.

IMPORTANT: The settings made here override such as sensor values as CO² or humidity.
NOTE: There is no logical examination held at intersections of the times entered. Therefore, make sure the definition that the times are logical.

 

Profile "Off"

The system performs no time or day of the week through induced changes in operating condition.

 

Copy settings

Select the days of the week on which you want to copy above defined time schedule. Click "Save" to apply the settings to the selected days of the week.

 

Please publish modules in offcanvas position.